Licensed · Bonded · Insured License No. WALLSNL741MT
Paver Patios & Walkways project by Wallscapes Northwest

Kirkland-based · Serving Lynnwood to Renton

Paver Patios & Walkways

Custom patios and walkways installed over a properly excavated, compacted, and graded base.

Request a free estimate →

Paver Patios & Walkways done with the full scope in mind.

Good paver work starts below the surface. We build patios and walkways with excavation depth, base compaction, edge restraint, drainage, layout, and joint material suited to Pacific Northwest weather.

What we handle

  • Paver patios
  • Walkways and paths
  • Paver restoration
  • Re-leveling sunken pavers
  • Polymeric sand
  • Steps and border details
01

Confirm layout, elevations, and water flow

02

Excavate and compact the aggregate base

03

Set bedding layer and install the selected pattern

04

Cut borders, restrain edges, compact, and finish joints

A clean surface starts with the base.

Layout and paver selection matter, but the long-term performance comes from excavation, aggregate placement, compaction, grade, drainage, edge restraint, and joint material.

  • Patios and outdoor living spaces
  • Walkways and garden paths
  • Steps, borders, and transitions
  • Existing paver restoration
Finished elevated paver patio installed by Wallscapes Northwest
Curved gray paver walkway installed by Wallscapes Northwest
Walkways

Connected, comfortable routes through the property.

Flagstone patio and fire pit area completed by Wallscapes Northwest
Outdoor living

Patios designed around how the space will be used.

Channel drain installed during hardscape construction by Wallscapes Northwest
Water management

Drainage planned with the finished surface.

Plan for appearance and performance.

What causes pavers to sink or become uneven?

Common causes include inadequate excavation, an under-compacted base, poor drainage, failed edge restraint, or disturbed soil. We identify the likely cause before re-leveling or rebuilding the affected area.

Can you restore an existing paver patio or walkway?

Yes. Depending on condition, restoration may include lifting pavers, correcting the base, re-leveling, replacing damaged units, resetting borders, pressure washing, and installing new joint sand.

How do you keep water from pooling on a paver patio?

The finished elevation and slope are established before the pavers are installed. Where surface grading alone is not enough, a channel drain, catch basin, or another controlled drainage route may be incorporated.

Do you install paver walkways as well as patios?

Yes. We install patios, walkways, paths, borders, steps, and transitions that connect with existing concrete, decks, lawns, and outdoor spaces.

Let’s look at your property.

Send the project details and photos. Kyle will follow up directly.